1.4122 aisi stainless-steel supplier

We produce ASTM/ASME Grade 304, Grade 304L,304h, 316, 316L, 316H, 316TI, 321, 321H, 309S, 309H, 310S, 310H, 410S, 2205, 904L, 2507, 254, gh3030, 625, 253MA, S30815, 317L, Type 317, 316lN, 8020, 800, 800H, C276, S32304 and others special requirement stainless steel grade.

Duplex Steel 1.4462 has good weldability and may be welded by most of the widespread welding strategies You also can use Avesta Welding 2205 when you weld each hot and cold formed or one thing comparable as filler metal. Steel Grade 1.4462 Machining shall be performed with excessive-speed instruments. This leads to a microstructure that gives corrosion properties and toughness roughly equal to that of the mother or father steel. Testing according to ASTM A262 PRE (Strauss´ take a look at) presents no issues for welded joints in Sandvik SAF 2205™, which cross without reservations.

Duplex is a grade of metal which accommodates austenite and ferrite parts in combos. Duplex grade is extraordinarily corrosion resistant and pitting resistant. Duplex 1.4462 Sheet could be very powerful enough strange ferritic chrome steel sheets.

Duplex stainless-steel or 1.4462 grade stainless is a very good grade for corrosion resistance and mechanical properties. Duplex names comes from properties of this grade, because this grades shows two completely different chrome steel grade phases and this s why it is called duplex. 1.4462 can also be referred to as 2205 or F51 and all these different names point out the same stainless steel grade. This grade has a better corrosion resistance then 316L and 316Ti. Also mechanical properties are %60 greater then austenitic grades like 304.

7 to 15 days,depends on the quantity

• 1.4462 Grade Plate materials can be hardenable in contrast to most different stainless-steel alloys.
• Most widespread austenitic type steels do not remain magnetic after the answer heating process.
• An easy differentiation of duplex and austenitic metal sorts is the magnetism of the Duplex Stainless Steel 1.4462 Material.

Mechanical Properties

Our stainless production range

Since the microstructure of 1.4462 Duplex Stainless Steel Coil consists each the ferritic and austenitic steel phases, it provides benefits of each sorts. Also, the presence of each phases within the microstructure brings some disadvantages from each types. 1.4462 Stainless Steel Hot Rolled Plate provides up some power as it’s processed in high heat before molding into the desired shape. 1.4462 Duplex Plate is one of the most used chrome steel alloys right now. It has a center vary of mechanical properties of chrome steel alloys which makes it utilized in many applications.

The chopping pace should, due to this fact, be decrease than that really helpful for ASTM 304/304L and 316/316L. It is beneficial that a more durable insert grade is used than when machining austenitic stainless steel, e.g.

The alloys usually are not intended to be used at temperatures above 300°C due to embrittlement. Duplex stainless steels are often chosen for his or her high mechanical properties and good to very high corrosion resistance (particularly to stress corrosion cracking). Being a two-section (austenitic-ferritic) materials, Sandvik SAF 2205™ will present a special tool wear profile from that of single phase steels of varieties ASTM TP304/304L and TP316/316L.

The ferritic chromium metal ASTM 410 fails at considerably decrease stress. Due to its glorious corrosion properties, Sandvik SAF 2205™ is a extremely suitable materials for service in environments containing chlorides and hydrogen sulphide. The material is suitable to be used in production tubing and flowlines for the extraction of oil and fuel from bitter wells, in refineries and in process options contaminated with chlorides. Sandvik SAF 2205™ is especially appropriate for heat exchangers where chloride-bearing water or brackish water is used as a cooling medium. The steel can also be suitable to be used in dilute sulphuric acid options and for handling, organic acids, e.g. acetic acid and mixtures.

We have thousands tons stock of stainless steel sheet and coil with various size and grade,mainly include austenitic stainless steel, martens stainless steel (including precipitation hardened stainless steel sheet & coil), ferritic stainless steel, and duplex stainless steel.

Characteristics of Stainless Steel Sheet and Plate:
High corrosion resistance
High strength
High toughness and impact resistance
Temperature resistance
High workability, including machining, stamping, fabricating and welding
Smooth surface finish that can be easily clean