Stainless Steel

We produce ASTM/ASME Grade 304, Grade 304L,304h, 316, 316L, 316H, 316TI, 321, 321H, 309S, 309H, 310S, 310H, 410S, 2205, 904L, 2507, 254, gh3030, 625, 253MA, S30815, 317L, Type 317, 316lN, 8020, 800, 800H, C276, S32304 and others special requirement stainless steel grade.

Length: 2000mm, 2438mm,2500mm,3000mm,6000mm,or required

Fabrication of all stainless steels should be accomplished solely with instruments dedicated to chrome steel supplies. These precautions are essential to keep away from cross contamination of stainless steel by simply corroded metals which will discolour the surface of the fabricated product. Steel grades are organized in accordance with the principle EN standards for flat and lengthy products. 316 has good resistance to oxidation in intermittent service to 870°C and in steady service to 925°C. However, continuous use at °C is not recommended if corrosion resistance in water is required.

The titanium atoms stabilise the structure of the 316 at temperatures over 800°C. This prevents carbide precipitation at the grain boundaries and protects the metallic from corrosion. The major advantage of 316Ti is that it may be held at greater temperatures for an extended interval with out sensitisation occurring. 316Ti retains physical and mechanical properties similar to standard grades of 316. Creep behavior also needs to be taken under consideration when utilizing the steel within the creep range.

Low thermal conductivity of austenitic alloys results in warmth concentrating at the cutting edges. Cuts should be light however deep enough to stop work hardening by riding on the surface of the material.

• Ferritic, martensitic, precipitation hardening, austenitic and austenitic-ferritic grades are included.
• Ferritic, martensitic, precipitation hardening, austenitic and austenitic-ferritic duplex grades are included.
• The chemical composition of all of the grades of chrome steel lined in the standard are listed.
• BS EN is the material normal for stainless steel semi-finished products, bars, rods and sections for basic functions.

Inorganic acids, e.g. phosphoric acid, at average concentrations and temperatures, and sulfuric acid under 20% at reasonable temperatures. The steel can also be used in sulfuric acid of concentrations above 90% at low temperature. Oxyacetylene welding has not been found to achieve success for joining of 316 stainless steel. ~ Low thermal conductivity of austenitic alloys results in warmth concentrating on the chopping edges.

Stainless steel varieties 1.4401 and 1.4404 are also referred to as grades 316 and 316L respectively. Grade 316 is an austenitic grade second only to 304 in industrial significance. 304 has excellent corrosion resistance in lots of environments and when in contact with different corrosive media. Pitting and crevice corrosion can happen in environments containing chlorides. Stainless steel varieties 1.4301 and 1.4307 are also referred to as grades 304 and 304L respectively.

In flue gases containing sulphur, the corrosion resistance is lowered. In such environments the steel can be used at temperatures up to 600–750°C (1110–1380°F) depending on service situations. Factors to consider are whether or not the atmosphere is oxidizing or decreasing, i.e. the oxygen content material, and whether or not impurities similar to sodium and vanadium are current. Sanmac 316/316L is a molybdenum-alloyed austenitic chromium-nickel steel with improved machinability. The grade is used for a wide range of commercial purposes the place steels of sorts ASTM 304/304L have inadequate corrosion resistance.

en8 bright bar

Our stainless production range

We have thousands tons stock of stainless steel sheet and coil with various size and grade,mainly include austenitic stainless steel, martens stainless steel (including precipitation hardened stainless steel sheet & coil), ferritic stainless steel, and duplex stainless steel.

Characteristics of Stainless Steel Sheet and Plate:
High corrosion resistance
High strength
High toughness and impact resistance
Temperature resistance
High workability, including machining, stamping, fabricating and welding
Smooth surface finish that can be easily clean

Warm chloride environments could cause pitting and crevice corrosion. Grade 316 is also topic to stress corrosion cracking above round 60°C. Fusion welding efficiency for sort 304 chrome steel is great both with and with out fillers.