Bs En Iso 3506
Our stainless production range
We have thousands tons stock of stainless steel sheet and coil with various size and grade,mainly include austenitic stainless steel, martens stainless steel (including precipitation hardened stainless steel sheet & coil), ferritic stainless steel, and duplex stainless steel.
Characteristics of Stainless Steel Sheet and Plate:
High corrosion resistance
High strength
High toughness and impact resistance
Temperature resistance
High workability, including machining, stamping, fabricating and welding
Smooth surface finish that can be easily clean
It is possible that they do not retain the specified mechanical and physical properties at elevated and/or decrease temperatures. It is frequent for 304 grades to be stocked in “Dual Certified” type. These items have chemical and mechanical properties complying with each 304 and 204L specifications.
This doc specifies the mechanical and physical properties of bolts, screws and studs, with coarse pitch thread and fantastic pitch thread, manufactured from corrosion-resistant stainless steels, when tested at the ambient temperature range of 10 °C to 35 °C. It specifies property lessons in relation to austenitic, martensitic, ferritic and duplex (austenitic-ferritic) steel grades for fasteners. It specifies the mechanical and bodily properties of nuts with coarse pitch thread and nice pitch thread, manufactured from corrosion-resistant stainless steels and when examined on the ambient temperature vary of 10 °C to 35 °C. This doc specifies basic guidelines and provides technical info on stainless steels and their properties, that are related when using other components of the ISO 3506 collection. It consists of specifications for corrosion-resistant stainless steels and nickel alloys, which are appropriate for the manufacture of fasteners.
Heat Treatment is by solution annealing – heated to ºC and cooled quickly. Cold working procedures enhanced levels of tensile power. All austenitic stainless-steel fasteners are normally non-magnetic in the annealed condition. NOTE 2 ISO is developed so as to assist in the number of applicable chrome steel grades and property lessons meant for use at temperatures as much as +800 °C.
Standard��ASTM,AISI,SUS,JIS,EN,DIN,GB,ASME,ETC
- It specifies property courses in relation to austenitic, martensitic, ferritic and duplex (austenitic-ferritic) steel grades for fasteners.
- It consists of specifications for corrosion-resistant stainless steels and nickel alloys, that are appropriate for the manufacture of fasteners.
- This document specifies the mechanical and physical properties of bolts, screws and studs, with coarse pitch thread and fine pitch thread, made from corrosion-resistant stainless steels, when examined at the ambient temperature range of 10 °C to 35 °C.
- It specifies the mechanical and physical properties of nuts with coarse pitch thread and fantastic pitch thread, made of corrosion-resistant stainless steels and when tested at the ambient temperature vary of 10 °C to 35 °C.
We produce ASTM/ASME Grade 304, Grade 304L,304h, 316, 316L, 316H, 316TI, 321, 321H, 309S, 309H, 310S, 310H, 410S, 2205, 904L, 2507, 254, gh3030, 625, 253MA, S30815, 317L, Type 317, 316lN, 8020, 800, 800H, C276, S32304 and others special requirement stainless steel grade.
It applies to austenitic, martensitic, ferritic and duplex (austenitic-ferritic) stainless-steel grades and nickel alloys for fasteners, and is intended for use along with the related components of the ISO 3506 collection. Common designations of stainless steels and nickel alloys used for fasteners are given in Annex A. Grade 304 is great in a wide range of atmospheric environments and lots of corrosive media, though it is subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 60ºC. Grade 304 is taken into account resistant to potable water with as much as about 200mg/L chlorides at ambient temperatures, reducing to about 150mg/L at 60ºC. The austenitic construction also provides these grades glorious toughness, even right down to cryogenic temperatures.
The balanced austenitic construction of Grade 304 permits it to be severely deep drawn without intermediate annealing; Grade 304 also has outstanding welding traits. That is particularly of excerpt about carbon content of austenitic A4 chrome steel. Typical physical properties of 304 grade stainless-steel in the annealed condition. Fasteners conforming to the necessities of this document are evaluated at the ambient temperature specified in paragraph 1.
material 1.4301 stainless-steel
NOTE 1 Fasteners conforming to the requirements of this doc are used without restriction in purposes starting from ? 20 °C to +a hundred and fifty °C; nonetheless, fasteners conforming to this document are also used for applications exterior this range all the way down to ? Labs for the standards you want Find testing labs that can carry out testing in accordance with the standards you are looking for. Get quotes shortly Submit a free request to get provides and recommendation from labs for testing based on the requirements you want. Easy communications with consultants Securely communicate with specialists on standardized testing and monitor the standing of your testing tasks.
Our stainless production range